MSI launches GeForce RTX 3080 Sea Hawk X – VideoCardz.com


MSI officially launches GeForce RTX 3080 Sea Hawk X

Months after MSI announced its liquid-cooled graphics card series called Sea Hawk the first graphics card from the series has finally been released.

The Sea Hawk has landed. MSI today launches its first liquid-cooled GeForce RTX 30 graphics card. This model features an All-in-One cooling solution with a large 240mm radiator and dual 120mm MSI Torx 4.0 fans. The graphics card has been equipped with a new ‘low profile’ liquid pump, which was designed in collaboration with Asetek. The pump is attached to a large micro-fin copper base, which covers both the GPU and memory.

MSI GeForce RTX 3080 10GB SEA HAWK X 3

This powerful cooling solution will now support Zero Frozr technology, which basically shuts the fans off under light load. MSI does not confirm at what temperature do the fans stop spinning, nor whether the pump is disabled as well.

The RTX 3080 Sea Hawk X is factory-overclocked to 1785 MHz, which is a moderate increase over reference specs (1710 MHz). This model features a full custom PCB with dual 8-pin power connectors. MSI did not share a picture of the PCB though, so it unclear whether Sea Hawk X shares the board design with other series such as Gaming X or Supreme.


&nbsp

MSI RTX 3080 10GB SEA HAWK X
Specs provided by VideoCardz.NET Database
GPU : GA102-200 Base Clock : 1440 MHz
Cores : 8704 Boost Clock : 1785 MHz (+4.4%)
TMUs : 272 Memory Clock : 19 Gbps
ROPs : 96 Memory : 10 GB GDDR6X 320b


MSI GeForce RTX 3080 10GB SEA HAWK X 2 e1618477987475

The GeForce RTX 3080 model is the first in the Sea Hawk series. MSI has not yet revealed its RTX 3090 design yet. There is also no sign of the non-X variants, which should feature lower clock speeds.

GeForce RTX™ 3080 SEA HAWK X 10G
The GeForce RTX™ 3080 delivers the ultra performance that gamers crave, powered by Ampere—NVIDIA’s 2nd gen RTX architecture. It’s built with enhanced RT Cores and Tensor Cores, new streaming multiprocessors, and superfast G6X memory for an amazing gaming experience.

  • Boost Clock / Memory Speed:
    • 1785 MHz / 19 Gbps
    • 10GB GDDR6X
    • DisplayPort x 3 (v1.4a)
    • HDMI x 1 (Supports 4K@120Hz as specified in HDMI 2.1)
  • Zero Frozr
    Zero Frozr is the calm before the storm, keeping fans still and maintaining silence until cooling is needed.
  • Micro-Fin Copper Base
    A micro-fin copper base covers both the GPU and VRAM to dissipate the heat efficiently.
  • Quick And Easy Installation
    The closed-loop cooling solution requires no additional maintenance or assembly.
  • TORX FAN 4.0
    A masterpiece of teamwork, fan blades work in pairs to create unprecedented levels of focused air pressure.

MSI GeForce RTX 3080 10GB SEA HAWK X 4 MSI GeForce RTX 3080 10GB SEA HAWK X5

Source: MSI

Many thanks to Jabatsaba22 for the tip!





Source link

Leave a Reply

Your email address will not be published. Required fields are marked *